1 |
A review of techniques for increasing the productivity of passive solar stills |
Sanjay Kumar Singh |
Sustainable Energy technologies and Assessments |
2022 |
102033 |
2 |
Experimental study of heat transfer and friction factor in double pipe heat exchanger using twisted tape with different groove angle of V- cut at constant depth |
Sanjay Kumar Singh |
International journal of Research in Engineering and Science. |
2022 |
2320-9364 |
3 |
Experimental study of heat transfer and friction factor in double pipe heat exchanger using twisted tape with axial and radial V-cut angles at constant depth of V- cut. |
Sanjay Kumar Singh |
International journal of Research in Engineering and Science. |
2022 |
2320-9356 |
4 |
Experimental study of heat transfer and friction factor in a double pipe heat exchanger using twisted tape with dimple inserts |
Sanjay Kumar Singh |
ENERGY SOURCES , PART A; RECOVERY UTILISATION AND ENVIRONMENTAL EFFECTS |
2021 |
19272488 |
5 |
Heat transfer friction factor correlations for double pipe heat exchanger with inner and outer corrugation |
Sanjay Kumar Singh |
ENERGY SOURCES , PART A; RECOVERY UTILISATION AND ENVIRONMENTAL EFFECTS |
2021 |
1953635 |
6 |
Experimental Investigation on tensile properties of polymer and composite specimens printed in triangular pattern |
Ruchin Kacker |
JOURNAL OF MANUFACTURING PROCESSES (Elsevier) |
2021 |
706-715 |
7 |
Qunatitative strength Analysis for 3D printed specimens printed in a tri hexagon pattern |
Ruchin Kacker |
Journal of Mechanical Engineering Science, Part C (SAGE) |
2021 |
7685-7698 |
8 |
Contact resistance prediction of zirconium joints welded by small scale resistance spot welding using ANN and RSM models |
Sanjay Chhalotre |
Materials Today |
2021 |
5907-5911 |
9 |
Comparison of Effects of Cross Sections of Twisted Inserts in a Concentric Tube Heat Exchanger |
Mousam Sharma |
Technology innovation in Mechanical Engineering (TIME-2021), Publication : Elsevier |
2021 |
|
10 |
An Introduction of Water Desalination Exploiting the Waste Heat and Other Different Renewable Source of Energy?,?International Conference on Technology Innovation in Mechanical Engineering (TIME-2021) |
Choudhary Keshavendra |
Technology innovation in Mechanical Engineering (TIME-2021), Publication : Elsevier |
2021 |
978-981-16-7908-7 |
11 |
Heat Transfer and Friction Factor Correlations for Double Pipe Heat Exchanger with Inner and Outer Corrugation |
Choudhary Keshavendra |
Technology innovation in Mechanical Engineering (TIME-2021), Publication : Elsevier |
2021 |
509450_1 |
12 |
Analysing the Effect of Weight Reduction of Crankshaft on the Pressure Parameter Inside Cylinder of Single Cylinder SI Engine |
Dr. Rashmi Dwivedi |
Materials Today Proceedings |
2021 |
2021.05.531 |
13 |
Surface Crack and Fatigue Analysis for Cylindrical Shaft Materials |
Dr. Rashmi Dwivedi |
Materials Today Proceedings |
2021 |
2021.05.161 |
14 |
Analysis of Friction Factor in Cold Forging by using Ring with Triangular Boss Compression Test |
Dr. Rashmi Dwivedi |
Advances in Materials and Processing Technologies |
2021 |
1945265 |
15 |
Development and Testing and Characterization of Al Nano TiCp Composites Through Powder Metallurgy Technique |
Dr. Rashmi Dwivedi |
Journal of Composites Science |
2021 |
|
16 |
Optimization of Wind Power Plant Sizing and Placement by the Application of Multi-Objective Genetic Algorithm (GA) in Madhya Pradesh, India. |
Dr. Prem Kumar Chaurasiya |
Sustainable Computing: Informatics and Systems. 2021 Sep |
2021 |
100606 |
17 |
Novel Deep Neural Network Technique for Detecting Environmental Effect of COVID-19. |
Dr. Prem Kumar Chaurasiya |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. |
2021 |
1941435 |
18 |
A Numerical Study on the Effect of Engine Characteristics by Using Ethanol-Moringa- Diesel Fuel. |
Dr. Prem Kumar Chaurasiya |
Kuwait Journal of Engineering Research. |
2021 |
13857 |
19 |
Validation of thermal models to predict the productivity and heat transfer coefficients for passive solar still with different nanoparticles. |
Dr. Prem Kumar Chaurasiya |
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. |
2021 |
1971338 |
20 |
Experimental and Numerical Analysis of Aluminum alloy Cylindrical Cup using Novel Deep Drawing Technique |
Dr. Rashmi Dwivedi |
Advances in Materials and Processing Technologies, Taylor & Francis |
2021 |
1878701 |
21 |
Experimental Inspection of Aluminium Matrix Composites Rinforced with SiC Particles fabricated through Ultrasonic assisted stir casting process |
Dr. Rashmi Dwivedi |
ICMPC20 |
2020 |
2020.02.634 |
22 |
Optimizing weight of mono Leaf Spring using FEA method |
Dr. Rashmi Dwivedi |
Smart moves journal IJOSCIENCE |
2020 |
|
23 |
A Review on Comparative analysis of Leaf Spring by Using Different Variable Materials |
Dr. Rashmi Dwivedi |
Smart moves journal IJOSCIENCE |
2020 |
|
24 |
Effect of Charge Temperature on Performance of 4s Single Cylinder Twin Spark SI Engine |
Dr. Rashmi Dwivedi |
IJEAT |
2020 |
49420 |
25 |
A performance evaluation of single basin double slope passive solar still using different materials as storage medium |
Dr. Rashmi Dwivedi |
IJCRT |
2020 |
2320-2828 |
26 |
FEA analysis of double tube heat exchanger on variable baffle pitch for optimizing thermal efficiency |
Dr. Rashmi Dwivedi |
Smart moves journal IJOSCIENCE |
2020 |
|
27 |
A performance evaluation of single basin double slope passive solar still using different materials as storage medium |
Dr. Prem Kumar Chaurasiya |
IJCRT |
2020 |
2320-2828 |
28 |
Effect of Charge Temperature on Performance of 4s Single Cylinder Twin Spark SI Engine |
Dr. Prem Kumar Chaurasiya |
IJEAT |
2020 |
49420 |
29 |
Effect of ethanol-methanol diesel micro algae blends on performance combustion and emmission of a direct injection diesel Engine |
Dr. Prem Kumar Chaurasiya |
Sustainable Energy and Technology Assessment |
2020 |
|
30 |
Financial assessment, performance and emission analysis of Moringa oleifera and Jatropha curcas methyl ester fuel blends in a single-cylinder diesel engine |
Dr. Prem Kumar Chaurasiya |
Energy Conversion and Management |
2020 |
0196-8904 |
31 |
Optimization of performance and emission parameters of direct injection diesel engine fuelled with microalgae Spirulina (L.) ? Response surface methodology and full factorial method approach |
Dr. Prem Kumar Chaurasiya |
Fuel |
2020 |
119103 |
32 |
Experimental & predicative analysis of engine characteristics of various biodiesels |
Dr. Prem Kumar Chaurasiya |
Fuel |
2020 |
119097 |
33 |
Investigations of Spirulina,waste cooking and animal fats blended biodiesel fuel on auto- ignition diesel engine performance,emission characteristics |
Dr. Prem Kumar Chaurasiya |
Fuel |
2020 |
118123 |
34 |
Experimental study of heat transfer enhancement from dimpled twisted tape in double pipe heat exchanger |
Dr.Sanjay Kumar Singh |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2020 |
|
35 |
Advances in heat transfer enhancement using twisted tape inserts with and without Nanofluid |
Dr.Sanjay Kumar Singh |
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2020 |
|
36 |
A performance evaluation of single basin double slope passive solar still using different materials as storage medium |
Dr.Sanjay Kumar Singh |
IJCRT |
2020 |
2320-2828 |
37 |
Effect of Charge Temperature on Performance of 4s Single Cylinder Twin Spark SI Engine |
Dr.Sanjay Kumar Singh |
IJEAT |
2020 |
49420 |
38 |
A comparative computational analysis on performance of a heat exchanger with coil inserts of various pitch lengths |
Yasir Baig |
IRJET |
2020 |
2395-0056 |
39 |
A performance evaluation of single basin double slope passive solar still using different materials as storage medium |
Dr. Ravishankar V Choudri |
IJCRT |
2020 |
2320-2828 |
40 |
Combustion and emission characteristics of diesel fuel blended with raw jatropha, soybean and waste cooking oils. |
Dr.Prem Kumar Chaurasiya |
Heliyon |
2019 |
e01564 |
41 |
Evaluation of Wind Energy Potential and Estimation of Wind Turbine Characteristics for Two Different Sites. |
Dr.Prem Kumar Chaurasiya |
International Journal of Ambient Energy |
2019 |
1409-1419 |
42 |
Combustion and emission characteristics of diesel fuel blended with rawjatropha, soybean and waste cooking oils |
Dr. Rashmi Dwivedi |
Heliyon |
2019 |
e01564 |
43 |
An Onsite Demonstration and Validation of LiDAR Technology for Wind Energy Resource Assessment |
Dr.Prem Kumar Chaurasiya |
International Journal of Sustainable Energy |
2019 |
701-715 |
44 |
Wind Energy Development and Policy in India: A Review. Energy Strategy and Reviews |
Dr.Prem Kumar Chaurasiya |
Energy Strategy and Reviews |
2019 |
342-357 |
45 |
Epidemic and challenges of coronavirus disease-2019 (covid-19): India response |
Dr.Prem Kumar Chaurasiya |
|
2019 |
|
46 |
Combustion and emission characteristics of diesel fuel blended with raw jatropha, soybean and waste cooking oils |
Dr.Prem Kumar Chaurasiya |
Heliyon |
2019 |
|
47 |
Combustion and emission characteristics of diesel fuel blended with raw jatropa, soybean and waste cooking oils |
Prof. Sanjay Kumar Singh |
Heliyon |
2019 |
e01564 |
48 |
Potential & Perspective Fragment of Nanotechnology on Energy Transmission Applications and Needs |
Dr. Keshavendra Choudhary |
International Journal of Engineering, Applied and Management Science Paradigms (IJEAM) |
2019 |
|
49 |
Combustion and emission characteristics of diesel fuel blended with rawjatropha, soybean and waste cooking oils |
Dr. Rashmi Dwivedi |
Heliyon |
2019 |
2405-8440 |
50 |
Combustion and emission characteristics of diesel fuel blended with raw jatropha, soybean and waste cooking oils. |
Prem Kumar Chaurasiya,Sanjay Singh, Rashmi Dwivedi, R.V. Choudri |
Heliyon |
2019 |
?ISSN: 2405-8440,?Vol. 5, pp- 1-7,10.1016/j.heliyon.2019.e01564 |
51 |
Wind Energy Potential and Estimation of Wind Turbine Characteristics for Two Different Sites. |
?Prem Kumar Chaurasiya,V Kranthi Kumar, Vilas Warudkar, Siraj Ahmed |
International Journal of Ambient Energy |
2019 |
ISSN: 2162-8246, 10.1080/01430750.2019.1611634. |
52 |
Wind Energy Development and Policy in India: A Review. Energy Strategy and Reviews |
?Prem Kumar Chaurasiya, Vilas Warudkar, Siraj Ahmed |
Energy Strategy and Reviews |
2019 |
ISSN: 2211-467X,???????????????????????? Vol. 24, pp- 342-357, 10.1016/j.esr.2019.04.010 |
53 |
An Onsite Demonstration and Validation of LiDAR Technology for Wind Energy Resource Assessment |
Prem Kumar Chaurasiya, Vilas Warudkar, Siraj Ahmed |
International Journal of Sustainable Energy |
2019 |
ISSN: 1478-646X, 10.1080/14786451.2019.1576684. |
54 |
Potential & Perspective Fragment of Nanorechnology on Energy Transmission Applications and Needs |
Dr. Keshavendra Choudhary |
International? Journal of Engineering, Applied and Management Science Paradigms (IJEAM) |
2019 |
2320-6608 |
55 |
Combustion and emission characteristics of diesel fuel blended with raw jatropa,soybean and waste cooking oils |
Sanjay Kumar Singh |
Heliyon |
2019 |
Heliyon 5(2019)e01564 |
56 |
Structural and Vibrational Analysis of Model aircraft tapered wing |
Dr. Rashmi Dwivedi |
IJSRD |
2018 |
2321-0613 |
57 |
Investigation of Multiple Cracks in Cantilever Beam- A Review |
Dr. Rashmi Dwivedi |
IJSRD |
2018 |
2321-0613 |
58 |
Analysis of Bending Strength of Involute Spur Gear with Asymmetric Profile |
Dr. Rashmi Dwivedi |
IJSRD |
2018 |
2321-0613 |
59 |
Heat Transfer & Friction Factor Characteristics Roughened Channels- A Review |
Dr. Rashmi Dwivedi |
IJSRD |
2018 |
2321-0613 |
60 |
Analysis of Stress and Bending Strength of Involutes Spur Gears with fillet Asymmetric Profile |
Dr. Rashmi Dwivedi |
IRJET |
2018 |
2385-0056 |
61 |
Investigation and analysis of multiple cracks in Cantilever Beam |
Dr. Rashmi Dwivedi |
IJTRD |
2018 |
2394-9333 |
62 |
Analysis of Static load bearing capacity of the Ball-Bearing- A Review |
Dr. Rashmi Dwivedi |
IRJET |
2018 |
2385-0056 |
63 |
Heat Transfer & Friction Factor Characteristics Roughened Channels ? A Review |
Dr. Rashmi Dwivedi |
IJSRD |
2018 |
2321-0613 |
64 |
Failure Analysis & Change the Design of Spokes a Head Gear Pulley Used in Coal Mines |
Dr. Rashmi Dwivedi |
JASRAE |
2018 |
2230-7540 |
65 |
Design and Analysis of Crankshaft using topology optimization in ANSYS |
Dr. Rashmi Dwivedi |
JASRAE |
2018 |
2230-7540 |
66 |
Comparative analysis of Weibull parameters for wind data measured from met-mast and remote sensing techniques. |
Prem Kumar Chaurasiya, Vilas Warudkar, Siraj Ahmed |
Renewable Energy. |
2018 |
ISSN: 0960-1481,??????????????????????? 115: 1153-65. 10.1016/j.renene.2017.08.014 |
67 |
RESEARCH ON DESIGNING OF AUTOMATIC REVERSE WHEEL LOCKING MECHANISM |
Harsh Patidar |
International Research Journal of Engineering and Technology (IRJET) |
2018 |
2395-0056 |
68 |
Experimental investigation of the effects of insulated air intake system on the performance of naturally aspirated MPSEFI spark ignition engine |
Sanjay Chhalotre |
AIP Conference Proceedings?2039 |
2018 |
Volume 2039, Issue 1 > 10.1063/1.5078960 |
69 |
Experimental investigation to analyze the effect of variation in intake air temperature on the throttle response of the S.I. Engine?? |
Sanjay Chhalotre |
International Journal of Mechanical Engineering and Technology |
2018 |
ISSN (P): 0976-6340; ISSN (E): 0976-6359 |
70 |
Investigation of the effects of gasoline ? Ethanol fuel blend on throttle response and intake air temperature in a naturally aspirated S.I. Engine?? |
Sanjay Chhalotre |
International Journal of Mechanical and Production Engineering Research and Development? |
2018 |
ISSN (P): 2249-6890; ISSN (E): 2249-8001 |
71 |
Experimental investigation of the effects of insulated air intake system on the performance of naturally aspirated MPSEFI spark ignition engine?? |
Sanjay Chhalotre |
AIP Conference Proceedings? |
2018 |
Scopus Elsevier |
72 |
A Thermo-Environmental Evaluation of a modified Combustion Gas Turbine Plant |
Dr. Keshavendra Choudhary |
Trans. Of ASME,Journal of Energy Resource Technology |
2018 |
JERT-18-1341 |
73 |
Simulation of shot peening process |
Dr. Rashmi Dwivedi |
Materials today Proceedings |
2017 |
2214-7853 |
74 |
Study of deep drawing process parameters |
Dr. Rashmi Dwivedi |
Materials today Proceedings |
2017 |
2214-7853 |
75 |
Optimization of process parameter of shot peening using ABAQUS |
Dr. Rashmi Dwivedi |
Materials today Proceedings |
2017 |
2214-7853 |
76 |
Numerical Study on Heat Transfer Rate of Corrugated Plate Heat and Its Comparison with Analytical values |
Amir Husain |
RGI International Journal of Applied Science & Technology, Volume 10 & 11, No.1 & 2 |
2017 |
2230-939X |
77 |
Buckling Analysis of Connecting Rod with Ultra Fine Grained Material AA2618 |
Nitin Kumar Sahu |
International Journal of Engineering Research & Technology (IJERT) |
2017 |
2278-0181 |
78 |
A REVIEW ON ENHANCEMENT OF HEAT TRANSFER RATE BY VARIOUS PASSIVE METHODS |
Yasir Baig |
International Research Journal of Engineering and Technology (IRJET),? Volume: 04 Issue: 12 |
2017 |
e-ISSN: 2395-0056, p-ISSN: 2395-0072 |
79 |
Wind Characteristicsobservation-using-Doppler-SODAR for wind energy applications |
Prem Kumar Chaurasiya, Vilas Warudkar, Siraj Ahmed |
Resource-Efficient Technologies. Elsevier. |
2017 |
ISSN 2405-6537, 10.1016/j.reffit.2017.07.001. |
80 |
Study of different parameters estimation methods of Weibull distribution to determine wind power density using ground based Doppler SODAR instrument. |
?Prem Kumar Chaurasiya, Vilas Warudkar, Siraj Ahmed |
Alexandria Engineering Journal |
2017 |
ISSN: 1110-0168,10.1016/j.aej.2017.08.008. |
81 |
DESIGN AND ANALYSIS OF HYDRAULIC SCISSORS LIFT FOR BIKE BY USING ANSYS |
Harsh Patidar |
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY SCIENCE & MANAGEMENT |
2017 |
2455-9679 |
82 |
REVIEW ON DESIGN AND ANALYSIS HYDRAULIC SCISSORS LIFT |
Harsh Patidar |
INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY SCIENCE & MANAGEMENT |
2017 |
2455-9679 |
83 |
An Experimental Analysis Of The performance Of Refrigeration System Based On (R134a + Al2O3) Refrigerant |
Sanjay Chhalotre |
International Journal Online of Science, Volume III, Issue III |
2017 |
ISSN: 2455-0108 |
84 |
A Review on Equivalent Static Loads Method for Non Linear Static Response Structural Optimization |
Mousam Sharma |
INTERNATIONAL JOURNAL FOR RESEARCH & DEVELOPMENT IN TECHNOLOGY Volume-7, Issue-5 |
2017 |
ISSN (O) :- 2349-3585 |
85 |
Optimization Approach for Crashworthiness of? Vehicles Based on Physically Defined Equivalent Static Loads for a new Topology |
Mousam Sharma |
?2017 IJSRSET | Volume 3 | Issue 3 |
2017 |
ISSN: 2395-1990 | Online ISSN: 2394-4099 |
86 |
A Review on Equivalent Static Loads Method for Non Linear Static Response Structural Optimization |
Suhail Ahmad Khan, Mousam Sharma |
INTERNATIONAL JOURNAL FOR RESEARCH & DEVELOPMENT IN TECHNOLOGY |
2017 |
ISSN (O) :- 2349-3585 |
87 |
Optimization Approach for Crashworthiness of? Vehicles Based on Physically Defined Equivalent Static Loads for a new Topology |
?Suhail Ahmad Khan, Mousam Sharma |
IJSRSET |
2017 |
Print ISSN: 2395-1990 | Online ISSN: 2394-4099 |
88 |
Comparison of Torsional Fracture strength of Cast Iron and Boron (SAE-1042)/Epoxy/Aluminum (6061 t6) (B/Ep/Al) Laminated Metal Composite (LMC) Specimens |
Ravishanker V. Choudri |
International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol 6 |
2017 |
ISSN (P): 2347-6710; ISSN (E): 2319-8753 |
89 |
Numerical Simulation of Scram-Jet Combustor Using Double Wall Injector |
Dr. Keshavendra Choudhary |
International Journal for Research in Applied Science & Engineering Technology (IJRASET), |
2017 |
2321-9653 |
90 |
FE Simulation Modelling and Exergy Analysis of Conventional Forging Deformation Behaviour of Material Processing |
Dr. Keshavendra Choudhary |
International Journal of Engineering Research and Application |
2017 |
2248-9622 |
91 |
Flow Analysis of Two Different Evaporator Arrangements in a Cold Storage Using CFD |
Dr. Keshavendra Choudhary |
International Journal of Engineering Associates |
2017 |
2320-0804 |
92 |
Innovative Idea for Automobiles Having Zero Harmful Emissions: A Review |
Dr. Keshavendra Choudhary |
International Journal of Engineering and Techniques |
2017 |
Vol. 3(5), pp. 143-146 |
93 |
A comparative experimental studies on effect of twisted tape insert on performance of? steel tube and copper tube DPHE |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
94 |
A comparative experimental study and performance analysis of double slope passive solar still filled with aluminum and jute |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
95 |
An experimental study and perfomance analysis of double slope solar still filled aluminum and granite at different depth of water |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
96 |
An experimental study and perfomance analysis of double slope single basinsolar still filled jute and granite . |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
97 |
A performance analysis and comparative study of single basin double slope passive solar still using different materials as storage medium. |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
98 |
Numerical analysis of crack propagation |
Sanjay Kumar Singh |
IJSRD |
2017 |
2321-0613 |
99 |
Comparative study of mono leaf spring for different materials using solid works |
Sanjay Kumar Singh |
IRJET |
2017 |
2395-0056 |
100 |
Buckling analysis of connecting rod with ultra fine grained material AA2618 |
Sanjay Kumar Singh |
IJERT |
2017 |
2278-0181 |
101 |
Deep drawing process for Aluminum alloy cylindrical cups |
Dr. Rashmi Dwivedi |
IJESMR |
2016 |
2349-6193 |
102 |
Analysis of connecting rod by the finite element method |
Dr. Rashmi Dwivedi |
IJAMMC-GRIET |
2016 |
2277-3886 |
103 |
A Review on Advances in Design and Development of Heat Exchanger |
Amir Husain |
International Journal of Research and Scientific Innovation, Volume 3 |
2016 |
2321-2705 |
104 |
A Review of Use FEM Techniques in Modeling of Human Knee Joint |
Nitin Kumar Sahu |
Journal of Biomimetics, Biomaterials and Biomedical Engineering |
2016 |
2296-9845 |
105 |
Tensile Fracture strength of Carbon (SAE-1042)/Epoxy/Aluminum (6082 T651) Laminated Metal Composite (LMC) |
Ravishanker V. Choudri |
International Journal of Engineering Research in Mechanical and Civil Engineering (IJERMCE) Vol 1 |
2016 |
3407-3415 |
106 |
Performance Analysis of Earth Tube Heat Exchanger |
Dr. Keshavendra Choudhary |
International Journal of Engineering Sciences & Research Technology |
2016 |
2277-9655 |
107 |
Acetylene Used as Alternative Fuel in Petrol Engin |
Dr. Keshavendra Choudhary |
International Journal of Engineering Sciences & Research Technolog |
2016 |
2277-9655 |
108 |
Prediction of Contact Pressure in Deep Drawing Process by FEM |
Dr. Rashmi Dwivedi |
IJAER, indexed in SCOPUS |
2015 |
P-ISSN-0973-4562 |
109 |
Forming of Aluminum and Brass Cylindrical Cups - Numerical Investigation |
Dr. Rashmi Dwivedi |
IJAER, indexed in SCOPUS |
2015 |
P-ISSN-0973-4562 |
110 |
Experimental & Finite Element Analysis of Mild Steel Impeller Sheet in a Deep Drawing Process through Trapezoidal Dies |
Dr. Rashmi Dwivedi |
IJAER, indexed in SCOPUS |
2015 |
P-ISSN-0973-4562 |
111 |
Numerical Simulation and Experimental Analysis on the Deep Drawing of Cylindrical Cups |
Dr. Rashmi Dwivedi |
Transactions of the Indian Institute of Metals, Springer |
2015 |
p-ISSN 0972-2815 |
112 |
Numerical Simulation of Aluminum and Brass Material Cups in Deep Drawing Process |
Dr. Rashmi Dwivedi |
Materials today Proceedings |
2015 |
2214-7853 |
113 |
Study of detection of defects in rolling element bearings using vibration and acoustic measurement methods- A Review |
Harsh Patidar |
International Journal of Mechanical Engineering Research & Technology |
2015 |
24574-535X |
114 |
Three dimensional computational fluid dynamics performance analysis of helical coil and straight tube heat exchanger |
Pawan kumar Yadav |
International Journal of modern Engineering Research(IJMER) |
2015 |
2249?6645 |
115 |
Study of Geometrical Parameters on Friction Calibration Curves of Non Conventional Specimens & Exergy Analysis |
Dr. Keshavendra Choudhary |
International Journal of Innovations in Engineering and Technology (IJIET) |
2015 |
2319-1058 |
116 |
Analysis of Various Properties of Textile Tarpaulins Made From High Density Polythylene Woven Fabric |
Dr. Keshavendra Choudhary |
International Research Journal of Engineering & Applied Sciences |
2015 |
ISSN: 2322-0821 (O), ISSN: 2394-9910 (P) |
117 |
Performance evaluation of biodiesel (pongamia or karanj oil) as an alternative fuel for diesel engine |
?Prem Kumar Chaurasiya, Jaydeep Lakwal, Manish Singh Bharti |
International Journal of Applied Science and Engineering Research |
2014 |
ISSN 2277 ? 9442, Vol. 3(1):288-96. 2014, 10.6088/ijaser.030100028 |
118 |
Development of Micro-Hydro Power Plant using Transistor Clamped Multilevel Inverter Development |
Prem Kumar Chaurasiya, Jaydeep Lakwal, Manish Singh Bharti |
International Journal of Innovative Research in Science, Engineering and Technology |
2014 |
ISSN: 2319-8753 |
119 |
To Improve Thermal Efficiency of 27 MW Coal Fired Power Plant |
Amit Kumar Vishwakarma |
International Journal of Mechanical Engineering Research. |
2014 |
2249-6645 |
120 |
Exploration of The Hydroforming Process For Manufacturing of Domestic Components By FEM Application |
Amit Kumar Vishwakarma |
International Journal of Engineering Research (IJER) |
2014 |
2319-6890 |
121 |
Analysis & Performance of Automobile Engine Components Considering Thermal and Structural Effects |
Sanjay Chhalotre |
IJIRSET |
2014 |
2319-8753 |
122 |
Comparative study and analysis between helical coil and straight tube heat exchanger |
Sanjay Kumar Singh |
IJERA |
2014 |
2248-9622 |
123 |
Emission Characteristics Curve for Ethanol Gasoline Blends with Varying Volumetric Ratios on Single Cylinder 4 Stroke S.I. Engine |
Kuldeep Namdev |
International Journal of Mechanical Engineering Research. |
2013 |
2249-0019 |
124 |
Performance Characteristics Curve for Ethanol Gasoline Blends with Varying Volumetric Ratios on Single Cylinder 4 Stroke S.I. Engine |
Kuldeep Namdev |
International Journal of Mechanical Engineering Research. |
2013 |
2249-0019 |
125 |
Scenario and Risk of Hydro Power Projects in India |
Prem Kumar Chaurasiya, Ruchi Khare, Vishnu Prasad |
International Journal of ChemTech Research |
2013 |
5(2):1068-75. |
126 |
Emission Characteristics Curve for Ethanol Gasoline Blends with Varying Volumetric Ratios on Single Cylinder 4 Stroke S.I. Engine |
Pawan kumar Yadav |
International Journal of Mechanical Engineering Research. |
2013 |
2249-0019 |
127 |
Performance Characteristics Curve for Ethanol Gasoline Blends with Varying Volumetric Ratios on Single Cylinder 4 Stroke S.I. Engine |
Pawan kumar Yadav |
International Journal of Mechanical Engineering Research. |
2013 |
2249-0019 |
128 |
Simulation Technique used to Analyze the Inlet System in Mould Cavity |
Mousam Sharma |
Advances in Computational Sciences and Technology ?Research India Publications |
2013 |
ISSN 0973-6107 |
129 |
Effects of Geometrical Parameters on Friction Calibration Curves of Non Conventional Specimens Experimental Analysis |
Dr. Keshavendra Choudhary |
International Journal of Advance Research in Science and Engineering |
2012 |
2319-8354 |
130 |
An Inverse Technique for Evaluation of Flow Parameters of Modeling Materials Using Extrusion |
Mousam Sharma |
Experimental Techniques, Wiley Publication |
2011 |
https://doi.org/10.1111/j.1747-1567.2011.00745.x |
131 |
Experimental investigation of the effect of die angle on extrusion process using plasticine |
Mousam Sharma |
Experimental Techniques Volume 35, Issue 6, pages 38?44, Wiley Publication |
2010 |
https://doi.org/10.1111/j.1747-1567.2010.00655.x |
132 |
Effects of Die Cross Section on Hollow Section Extrusion using Plasticine Experiment? |
Mousam Sharma |
Journal of Archives of Applied Science Research |
2010 |
ISSN: 0975-508X |
133 |
Exergy Analysis of a Gas Turbine Trigeneration system Cycle using Brayton Refrigeration cycle for inlet air cooling |
Dr. Keshavendra Choudhary |
Instn Mech Engrs, Part A:J. Power and energy |
2010 |
0957-6509 |
134 |
Casting Feedability Design using Computer Simulation |
Mousam Sharma |
FOUNDARY |
2009 |
NA |
135 |
Application of Neural Networks in Extrusion Process |
Mousam Sharma |
IE(I) Journal-PR, Vol 90 |
2009 |
NA |
136 |
Design of Die Angle for Square Rod Extrusion of? -Iron using DMM |
Mousam Sharma |
IE(I) Journal-PR, Vol 90 |
2009 |
NA |
137 |
Energy and Exergy Analyses of Compressor Inlet Air-Cooled Gas Turbines using the Joule-Brayton Refrigeration Cycle |
Dr. Keshavendra Choudhary |
Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy (2009) |
2009 |
(2009) 223(1) 1-9 |
138 |
Thermodynamic Evaluation of Gas Turbines for Cogeneration Applications |
Dr. Keshavendra Choudhary |
International Journal of Exergy |
2009 |
(2009) 6(1) 15-33 |
139 |
Exergy Analysis of a Regenerative Gas Turbine Cycle using Absorption inlet Cooling and Evaporative Aftercooling |
Dr. Keshavendra Choudhary |
Journal of the Energy Institute |
2009 |
(2009) 82(3) 159-167 |
140 |
Role of Computers in the development of Rural Technologies |
Mousam Sharma |
Journal of Rural Technology Vol.3, No.5, CSIR New Delhi |
2007 |
NA |
141 |
Combined First and Second Law Analysis of Gas Turbine Cogeneration System with Inlet Air Cooling and Evaporative Aftecooling of the Compressor Discharge |
Dr. Keshavendra Choudhary |
Journal of Engineering for Gas Turbine and Power |
2007 |
(2007) 129(4) 1004-1011 |
142 |
Thermodynamic Performance Assessment of an Indirect Intercooled Reheat Regenerative Gas Turbine Cycle with Inlet Air Cooling and Evaporative Aftercooling of the Compressor Discharge |
Dr. Keshavendra Choudhary |
International Journal of Energy Research |
2006 |
(2006) 30(15) 1295-1312 |
143 |
Numerical Study for Nox Reduction in a Marine Diesel Engine Using SCR |
Saurabh Verma, Nitin Malviya |
International Journal of Engineering Associates / Volume 5 Issue 1 |
0 |
2320-0804 |
144 |
Review of Performance and Emission Analysis of Biodiesel Blends An Promising Alternative Fue |
Amol Bharat Varandal & Nitin Malviya |
IJIMINDS Journal, Volume-01, Issue |
0 |
2349-2082 |
145 |
Experimental study on effect of length of twisted tape on performance of externally helical wire wound double pipe heat exchanger for parallel and counter flows |
Sanjay Kumar? |
|
0 |
|